The sling round wire drawing machine is a mechanical device with very high speed control requirements, requiring the control system to provide very smooth, linear speed. The main function of the sling round wire drawing unit is to process the copper wire into various specifications of thin wires. The group of equipment generally has impact load characteristics, and has the characteristics of large starting torque and low speed full torque output. Widely used in machinery manufacturing, metal processing, petrochemical, plastics, bamboo and wood products, wire and cable and other industries.

The following five items should be noted when installing and using the sling round wire drawing unit:

1. The installation foundation of the wire drawing machine must be fixed to avoid vibration.

2. When installing, the tension axis of the wire should be symmetrical with the center line of the die hole, so that the stress of the wire and the wire drawing die is even;

3. Avoid frequent starting of the parking during the pulling process, because the friction caused by the tensile stress at the beginning of pulling is much larger than the friction during normal drawing, which will inevitably increase the wear of the mold.

4. The wire used for drawing is also pretreated: surface pretreatment and heat treatment.

5. The wire drawing machine should be cleaned and maintained regularly, which not only can reduce the faulty products, but also prolong the service life of the machine.