First, the weaving machine density of the braid does not meet the requirements
cause: 
1. The density of the braiding machine is related to the number of braided spindles, the number of spindles per spindle and the diameter, the pitch, and the angle of preparation.
2. The number of ingots, the number of ingots, and the diameter are constant. The larger the pitch knitting angle, the lower the weaving density.
Prevention and treatment methods:
1. Check the knitting machine pitch and knitting angle. If there is any problem, adjust it in time to check whether there is any root missing, missing strand and small diameter should be added or replaced in time.
2. Maintain the number of spindles, root and diameter weave pitch, and coordinate angles
Second, the weaving machine braid density unevenness strands are tight
Cause: The tension of the braided wire strands is out of control.
Prevention and treatment methods: Replace the elastic springs due to long-term fatigue, and adjust the tension of each strand.
Third, the weaving machine weave pitch is uneven
Cause: The number of windings on the traction wheel is too small, resulting in unstable sliding spindle speed and traction line speed.
Prevention and control methods: Appropriately increase the number of turns of the cable on the traction wheel, and adjust the speed between the two.
Fourth, the weaving machine has a hole in the braid, and causes:
1. The strands are broken, the tension of the strands is unevenly controlled, and the cross-pressing lines are piled up, and the lines are unevenly arranged.
2. The tension of the spindle is not evenly adjusted, and the strands are tight.
3. When the strand is broken, the repair method is improper.
Prevention and treatment methods:
1. Adjust the alignment tension
2. Adjust the spindle tension